Counter Check - Sharp MODEL R-2197 Operation Manual

Counter Check

The number of times when the oven will be used are automatically accumulated for each key. You can check how
many times the oven was used.
Set the counters to "0" before using your new oven (see COUNTER CLEAR below) to keep a record of the oven use.
COUNTER CHECK
* Suppose you want to know the total times the oven was used, and the number of times each
programme was used. In the following example, the total time was 8268 and memory 1 was 513.
Step
Procedure
1 To choose checking mode, press the
CHECK pad twice.
2
To check the times of using the
memory 1, press the NUMBER pad
.
Note: 1. To cancel Counter Check mode, press the CHECK pad.
2. Each counter can count the times up to 9999, and it will return to 0 if it is over 9999.
3. To check the times of manual cooking, press the SELECT TIME pad at Step 2 instead of the NUMBER pad.
To check the times of EXPRESS DEFROST cooking, press the EXPRESS DEFROST pad at Step 2
instead of the NUMBER pad.
COUNTER CLEAR
Each number of times can be cleared.
* Suppose you want to clear the times of memory 1.
Step
Procedure
Press the CHECK pad twice.
1
2
Press the NUMBER pad
3 Press the SET pad.
Note: 1. To cancel Counter clear mode, press the CHECK pad.
2. To clear the times of manual cooking, press the SELECT TIME pad at Step 2 instead of the NUMBER pad.
To clear the times of EXPRESS DEFROST cooking, press the EXPRESS DEFROST pad at Step 2
instead of the NUMBER pad.
3. To clear total using times, skip Step 2.
Pad Order
Pad Order
.
13
Display
X 2
CHECK will flash on and off.
(Total times used)
After about 1 sec.
(Times memory 1 was used)
Display
X 2
CHECK will flash on and off.
(Total times used)
After about 1 sec.
(Times memory 1 was used)
CHECK
NO. CHECK
CHECK
CHECK
NO. CHECK
CHECK
CHECK