TRENDnet TEG-S80ES User Manual page 7

TRENDnet User's Guide
5. Enter the User Name and Password, and then click Login. By default:
User Name: admin
Password: admin
Note: User name and password are case sensitive.
6. Click System and then click IPv4 Setup.
© Copyright 2018 TRENDnet. All Rights Reserved.
7. Configure the switch IP address settings to be within your network subnet, then click
Apply.
Note: You may need to modify the static IP address settings of your computer's network
adapter to IP address settings within your subnet in order to regain access to the switch.
8. When confirmation message appears click OK.
NOTE: The configured settings are only applied to the switch's temporary memory and
will be lost upon the next power-cycle. Please follow these next steps to save the
configurations to the switch's NV-RAM to ensure the settings will remain throughout
power-cycles and reboots:
TEG-S80ES
4