TRENDnet TEG-S80ES User Manual page 39

TRENDnet User's Guide
1. Log into your switch management page (see
on page 7).
2. Click on Network, click on VLAN, and click on Private.
3. To configure Private VLAN Settings, perform the following procedure:

Set the Source Port to one of the following choices from the pull-down menu:
All, 01 – 8

Click on the Forwarding Ports ratio button that applies to your configuration.

Click Add to add the new entry, or Delete to delete the entry for the selected
Source Port.
NOTE: The configured settings are only applied to the switch's temporary memory and
will be lost upon the next power-cycle. Please follow these next steps to save the
configurations to the switch's NV-RAM to ensure the settings will remain throughout
power-cycles and reboots:
© Copyright 2018 TRENDnet. All Rights Reserved.
"Access your switch management page" 1. From the menu on the left: click on Save, then click the blue button Save
Settings to Flash.
2. Click Continue to return to the Web Configuration of your switch.
TEG-S80ES
36