Power Control; Digital Setup; Audio Setup - Sharp LC-65D93U Operation Manual

Basic adjustment settings

Power Control

Power control setting allows you to save energy.
No signal off
When set to "Enable", the power will automatically shut
down if there is no signal for 15 minutes.
Press MENU to display the MENU screen,
1
and then press c / d to select "Power
Control".
Press a / b to select "No Signal Off", and
2
then press ENTER.
Press c / d to select "Enable", and then
3
press ENTER.
Enable
• Five minutes before the power shuts down, the
remaining time displays every minute.
Press MENU to exit.
4
NOTE
• "Disable" is the factory preset value.
• When a TV program fi nishes, this function may not operate.
No operation off
When set to "Enable", the power will automatically shut
down if there is no operation for 3 hours.
Press MENU to display the MENU screen,
1
and then press c / d to select "Power
Control".
Press a / b to select "No Operation Off", and
2
then press ENTER.
Press c / d to select "Enable", and then
3
press ENTER.
• Five minutes before the power shuts down, the
remaining time displays every minute.
Press MENU to exit.
4
NOTE
• "Disable" is the factory preset value.

Digital Setup

This setting allows you to optimize the settings of
Digital broadcasting.

Audio Setup

You can output digital audio to an AV amplifi er or
similar device whose DIGITAL AUDIO INPUT terminal
is connected to the DIGITAL AUDIO OUTPUT terminal
on the TV. Please select an audio output format
compatible with the audio format of the program you
are watching and the equipment connected.
Press MENU to display the MENU screen,
1
and then press c / d to select "Digital
Setup".
Press a / b to select "Audio Setup", and then
2
press ENTER.
Press a / b to select "PCM" or "Dolby
3
Disable
Digital", and then press ENTER.
Selected item
PCM
Dolby Digital
Press MENU to exit.
4
PCM
Dolby Digital
Description
The optical output terminal outputs
audio signal in PCM form. If your
digital audio system does not support
Dolby Digital, select "PCM".
The optical output terminal outputs
audio signal in Dolby Digital form.
It reproduces sound from surround
program of digital.
29