Ez Setup; Channel Setup - Sharp LC-65D93U Operation Manual

Basic adjustment settings

EZ Setup

You can run EZ Setup again, even after setting up the
preset channels.
Language setting
Select from among 3 languages: English, French and
Spanish.
Press MENU to display the MENU screen,
1
and then press c / d to select "Setup".
Press a / b to select "EZ Setup", and then
2
press ENTER.
• If you already set the Secret No., go to step 3. If
not, skip to step 4.
Input the 4-digit secret number by using 0–9.
3
Press a / b to select the desired language
4
listed on the screen, and then press ENTER.
Antenna setting
Make sure what kind of connection is made with your
TV when selecting "Air" or "Cable".
Press c / d to select "Air" or "Cable".
5
Press ENTER to enter the setting.
Channel search
Channel auto search makes the TV look for all channels
viewable in the set area.
When "Air" is selected in Antenna
6
setting:
Press c / d to select "Start", and then press
ENTER.
When "Cable" is selected in Antenna
setting:
Press a / b to select "Analog & Digital
Search Start" to search both analog and
digital broadcasts or "Analog Search Start"
to search only analog broadcasts, and then
press ENTER.
• The Channel search will start automatically.
• To exit the Channel search screen, select
"Cancel", and then press ENTER.
Press MENU to exit.
7
NOTE
• If no channel is found, confi rm the type of connection made
with your TV and try EZ Setup again.
• If you select "Analog Search Start" and initiate the channel
search, the CH Memory for Cable Digital will be deleted.

Channel Setup

If initial setup does not memorize all the channels in
your region, follow the instructions below to manually
memorize the channels.
Antenna setting
Press MENU to display the MENU screen,
1
and then press c / d to select "Setup".
Press a / b to select "CH Setup", and then
2
press ENTER.
• If you already set the Secret No., input the
4-digit secret number here. See page 42 for
setting a secret number.
Press a / b to select "Air/Cable", and then
3
press ENTER.
Press c / d to select "Air" or "Cable".
4
Press ENTER to enter the setting.
Press MENU to exit.
5
Channel search
Channel auto search makes the TV look for all channels
viewable in the set area.
Repeat steps 1 and 2 in Antenna setting in
1
Channel Setup.
Press a / b to select "CH Search", and then
2
press ENTER.
When "Air" is selected in Antenna
3
setting:
Press c / d to select "Start", and then press
ENTER.
When "Cable" is selected in Antenna
setting:
Press a / b to select "Analog & Digital
Search Start" to search both analog and
digital broadcasts or "Analog Search Start"
to search only analog broadcasts, and then
press ENTER.
• The Channel search will start automatically.
• To exit the Channel search screen, select
"Cancel", and then press ENTER.
Press MENU to exit.
4
NOTE
• If no channel is found, confi rm the type of connection made
with your TV and try channel search again.
• If you select "Analog Search Start" and initiate the channel
search, the CH Memory for Cable Digital will be deleted.
23