Operating Clock Timer & Lighting - DCI Edge SERIES 4 Instructions For Use Manual

SERIES 4 & SERIES 5 12 O'CLOCK CABINET
Instructions For Use
OPERATION - CLOCK TIMER AND LIGHTING CONTROL
CONTROLS
PRESS LIGHT ON/OFF to toggle the LED task lighting on or off
SET CLOCK: Press and hold the "MODE" key for 3 seconds to set the clock.
Press ARROW UP and ARROW DOWN keys to adjust the hours.
Press Hr/Min/Sec to Switch to editing minutes, adjust with arrow keys.
Press Hr/Min/Sec to Switch to editing day of the week, adjust with arrow keys.
Press Hr/Min/Sec to Switch to editing day of the month, adjust with arrow keys.
Press Hr/Min/Sec to Switch to editing the month, adjust with arrow keys.
Press Hr/Min/Sec to return back to editing hours.
Press RESET to restart at 12:00.
Exit CLOCK SETTING MODE by pressing START/STOP or MODE.
TIMER MODE:
Press MODE once from the CLOCK display to enter TIMER MODE.
Press ARROW UP and ARROW DOWN keys to adjust minutes, adjust with arrow keys.
Press Hr/Min/Sec to switch to editing seconds. Adjust with arrow keys.
Press START/STOP to begin countdown of currently displayed time.
Press START/STOP to pause the countdown.
Using Timer Presets (From Clock or Timer mode)
Press PRESET A, B, or C for quick access to pre-programmed PRESET times.
Press START/STOP to begin the timer. Press again to pause.
Programming Timer Presets
While in Timer Mode, use the arrow keys to adjust the timer to the desired amount of time.
Press and hold the PRESET A, B, or C key for 3 seconds to store the time into memory.
STOPWATCH MODE: Press MODE twice from CLOCK MODE to enter STOPWATCH MODE
Press START/STOP to begin counting up of currently diplayed time.
Press START/STOP to pause the counting.
Press RESET to return to 00:00.
Press MODE to go to CLOCK.
6
TIMER PRESET KEYS
ARROW KEYS
TASK LIGHT ON/OFF
NOTE: To briefly check the clock
time while in TIMER MODE or
STOPWATCH MODE, press and
hold MODE. Release to return to
the previously displayed screen.
6