DCI Edge SERIES 4 Installation Instructions Manual page 9

INSTALLATION
ADD UPPER FRONT STORAGE
Install the center divider panel using two 2-1/8"
1
High/Low screws.
Install the metal backsplash behind the sink using
2
two1/4-20 x 2 3/8" bolts. Install screws from
below the counter without tightening.
Push the backsplash against the divider panel and
3
tighten the 1/4-20 x 2-3/8" bolts.
Use four 1/4-20 x 2" bolts to secure the Front
4
Upper Module to the Support Column.
5
Re-attach all drawers and doors.
SERIES 4 & SERIES 5 CENTER ISLAND CABINET
Installation Instructions
9