Ip Routing - D-Link DAP-3315 User Manual

Section 3 - Configuration
This page will allow you to define specific routes that will be
broadcasted by the AP and made available to the clients that
connect to it.
Mode: Select Enabled to create static route.
Destination Enter either the destination network, or the
Net/Mask: subnet mask that will be used in the static
route.
Via: Select whether the static route will be controlled
by an existing gateway, or if the interface on
the AP should route the traffic.
Gateway: This option becomes available if Gateway is
selected. Enter the gateway IP address.
D-Link DAP-3315 User Manual

IP Routing

Static Routing Setup
48