D-Link DAP-3315 User Manual page 12

Section 2 - Installation
A. Connect the Ethernet cable that is connected to the AP from STEP 1 to the POE port on the PoE Injector.
B. Connect an Ethernet cable from a router, switch, or PC to the LAN port on the PoE Injector.
C. Attach the power cord to connect PoE injector, and plug it into an electrical outlet.
This product uses a proprietary PoE design and can only be used with the included PoE injector.
1
D-Link DAP-3315 User Manual
STEP 2: Connect the AP to Your Network
LAN (PoE)
A
POE
POWER
IN
C
Router or Switch Computer
AP
1
PoE Injector
1
LAN
B
12