3
Configuring the Thermostat
STEP 1: Start the Configuration Wizard
Follow the instructions of the Configuration Wizard. To start the Wizard, click on the Thermostat
symbol in the floor plan, then click "Configuration" in the menu that appears on the right.
After the configuration is complete, the Thermostat will appear in the DEVICES List View:
Once you add a second Thermostat you will be asked if it is a Master or a Slave:
Please refer to section 2.1 for more information on "Master" and "Slave".
STEP 2: Adapt the Settings, if required
The following table shows the Thermostat settings.
3.1
Thermostat Settings
Setting
Description
Sometimes
temperature shown
on Thermostat is
Temperature
incorrect, i.e. due to
correction
air draft. This setting
allows user to
correct temperature
value.
Presence
For future purposes.
Detector
Will be hidden in the
Timed On
next software
Duration [s]
version.
Product Manual 2CQA 100 014 B0001 │ 2018-09-28
Options
27 to 38 in
increments of 1
Configuring the Thermostat
Image
│8