ABB -free@home TH-1.1 Product Manual page 12

Setting Description
Shortcut for
For future purposes.
the ...
Will be hidden in the
next software
(multiple
version.
settings)
Fan run time
Setting limits time
when
fan is ON when user
manually
touches Fan symbol.
switched on
By default, display
brightness dims
automatically if room
Switch light goes down. If
Display Off at setting is set to
Night "Yes", it will switch
OFF when room light
goes below certain
level.
Setting defines
Display
display brightness on
Brightness
Thermostat.
Protection: If temperature rises
Force cooling above this value
if temperature cooling will switch
exceeds [°F] ON to protect home.
Protection:
If temperature drops
Force heating
below this value
if temperature
heating will switch
falls below
ON to protect home.
[°F]
For future purposes.
Compressor Will be hidden in the
lockout [°F] next software
version.
For future purposes.
Heat pump
Will be hidden in the
aux heat
next software
lockout [°F]
version.
Limits how often
compressor for stage
1 cooling is switched
ON. Limiting
Max.
compressor cycles
compressor
saves energy and
cycles per
reduces wear. Stage
st
hour, 1 stage
1 is controlled by Y1.
Compressor is part
of air-conditioner or
heat pump.
Product Manual 2CQA 100 014 B0001 │ 2018-09-28
Options
(keep
unchanged)
· Unlimited
· 10 minutes
· 20 minutes
· 30 minutes
·
60 minutes
Yes
No
0 to 100 in
increments of 10
86 to 104
in increments of 1
34 to 50
in increments of 1
(keep unchanged)
(keep unchanged)
1 to 6
in increments of 1
Configuring the Thermostat
Image
│12