ABB -free@home TH-1.1 Product Manual page 14

Setting Description
cooled/warmed by
fan.
Limits how often
Heat pump
Thermostat will
remains in a
switch between 1
stage for a
nd
and 2
minimum of
heating or cooling
... [min]
sources.
High cool For future purposes.
latch Will be hidden in the
temperature next software
[°F] version.
High cool For future purposes.
latch Will be hidden in the
temperature next software
[°F] version.
Thermostat starts
heating if actual
Heating starts
temperature falls
at... below
below setpoint value.
setpoint [°F]
Not relevant in ECO
mode.
Thermostat starts
cooling if actual
Cooling starts
temperature
at ... above
exceeds setpoint
setpoint [°F]
value. Not relevant
in ECO mode.
If both
heating/cooling are
enabled, Thermostat
can automatically
switch between
them, i.e. if house
cools rapidly at night
after hot day. Setting
Switching
defines how quickly
delay between
system will switch
heating and
between heating and
cooling
cooling modes.
Medium is the
recommended mode.
Note: Default mode
is "None".
Select which icons
User Mode are accessible from
the main screen.
Product Manual 2CQA 100 014 B0001 │ 2018-09-28
Options
10 to 25
st
stage
in increments of 5
(keep
unchanged)
(keep
unchanged)
32 to 50 in
increments of 1
32 to 50 in
increments of 1
· None: Stays in
original mode
setting until user
disables it
· Low: Changes
immediately
between
heating/cooling,
changes can
occur frequently
· Medium: Changes
between
heating/cooling
after a reasonable
time, approx. 30
minutes to one
hour
· High: Waits
several hours
before switching
between
heating/cooling.
· Normal User:
All icons available
in settings menu
· Power User:
All icons displayed
Configuring the Thermostat
Image
│14