The Device; Function Overview - ABB -free@home TH-1.1 Product Manual

1

The Device

This section contains a short overview of the display and hardware functions of the device.
1.1

Function Overview

Product Manual 2CQA 100 014 B0001 │ 2018-09-28
Heating & Cooling Indicators
Red and blue semi-circles indicate if device is heating (red), cooling
(blue), or idle (both off).
Room Temperature
Large number in middle of display shows current home temperature.
Setpoint Temperature
Small number above large number is desired temperature. Use arrows
to change. Both setpoint and arrows appear when your hand nears
device. Note: Setpoint can be changed in device settings.
Settings
Tap to activate or deactivate function. Switch between "active view"
and "settings view".
Heating & Cooling
Tap to enable or disable heating/cooling mode.
Fan
Fan can be set to ON or AUTO mode. By default, it is in AUTO mode.
Tap to turn ON the fan.
The Device
│3