ABB -free@home TH-1.1 Product Manual page 11

Setting Description
Note: Not for water-
based systems.
Delays time for fan
Fan delay ON
after heating starts.
heating [s]
Prevents cold air
coming out of vent
while heater is
warming up.
Thermostat switches
nd
to 2 stage
heating/cooling
system after
Go directly to
detecting 1
nd
2 stage after
unable to bring
... if
temperature to within
difference >
5°F of setpoint within
5°F
certain time.
Thermostat activates
nd
to 2 stage after
certain elapsed time.
Setting defines
temperature values
displayed on
Displayed
Thermostat after
values
user's hand has
approached device.
When switched off,
Show device shows "OFF"
temperature on display. If "Yes" is
when selected, current
switched off temperature will also
be displayed.
Setpoint change
occurs automatically
Eco
and is not displayed
Temperature
on Thermostat.
Offset [°F]
Product Manual 2CQA 100 014 B0001 │ 2018-09-28
Options
0 to 240
in increments of 10
st
stage is
30 to 360
in increments of 10
· Current
temperature: big;
Setpoint: small
· Setpoint
temperature only
· Current
temperature only
· Setpoint
temperature: big;
Current: small
· Setpoint
prominent, outside
temperature small
· Actual
temperature
prominent, outside
temperature small
Yes
No
· If ECO (green-leaf
symbol) is active:
Setpoint is
changed by this
value
· If heating is
active: Setpoint
is decreased
· If cooling is active:
Setpoint is
increased
Configuring the Thermostat
Image
│11