Preparation; Power Connection; Batteries For Remote Control - Sharp LC-15M4U Operation Manual

PREPARATION

Power Connection

Plug into AC outlet.
AC cord
Notes:
I Always turn the main power switch of the LCD monitor to OFF when connecting the AC adapter.
I Always unplug the AC adapter from the product and power outlet when not being used for a long period of time.

Batteries for Remote Control

If the remote control fails to operate monitor functions, replace the batteries in the remote control.
1
Open the battery
cover.
I Slide the cover while
pressing down.
Caution!
Cautions regarding batteries
Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the
instructions below.
• Place batteries with their terminals corresponding to the (+) and (–) indications.
• Different types of batteries have different characteristics. Do not mix batteries of different types.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries
and/or cause old batteries to leak chemicals.
• Remove batteries as soon as they are non-operable.
Chemicals that leak from batteries can cause a rash. If chemical leakage is found, wipe with a cloth.
• The batteries supplied with the product may have a shorter life expectancy due to storage conditions.
• If the remote control is not used for an extended period of time, remove batteries from the remote
control.
8
LC-15M4U(01-08)Eng.p65
Household power outlet
AC adapter
2
Insert batteries (two "AAA"
size (UM/SUM-4) batteries,
supplied with product).
I Place batteries with their
terminals corresponding to
the (+) and (–) indications
in the battery compartment.
8
Connect to DC input
terminal of the product.
DC input terminal
(12 VDC)
3
Close the battery
cover.
01.7.24, 5:21 PM