Table of Contents
Advertisement
Remote Air Temperature Sensor Wiring
Set TT= RS in the Advanced installer menu (default)
When you wish to measure the temperature from a location distant from the wall
controller, connect a remote temperature sensor to the TT terminals in the
SMART 2000. This will automatically disable the sensor fitted to the wall controller
and use the remote temperature sensor(s) to control the room temperature.
See Figure 21. Should you wish, you can switch the remote temperature sensor
ON and OFF, switching temperature sensing locations between the remote
temperature sensor and the thermostat temperature sensor when required. Fit an
inline switch in the sensor wiring or order SMART-R-02 sensor. See Figure 22.
Averaging Temperature Sensors
Set TT = AV in the Advanced Installer Menu
The SMART 2000 can average the sensed temperature equally between the
remote temperature sensor(s) and the one fitted to the thermostat if required.
See Figure 21 for details on wiring the sensor. The thermostat will auto-detect
this sensor and automatically average the two sensors values to control the room
temperature.
42
Hide quick links:
Advertisement
Table of Contents
