Robertshaw Smart Sense Series Installation Manual page 32

OH = OFF OCCuPied MOde HeAT SeT (See PAge 43)
Only operates if TT = OC
This is the heating temperature that will be used in Occupied Mode and will
temporarily replace the user heat setpoint while the TT terminals are shorted
together. Adjustable range is 41 to 120ºF (5.0 to 49ºC)
OC = OFF OCCuPied MOde COOL SeT (See PAge 43).
Only operates if TT = OC.
This is the cooling temperature that will be used in Occupied Mode and will
temporarily replace the user cool setpoint while the TT terminals are shorted
together. Adjustable range is 43 to 122ºF (6.0 to 50ºC)
SP = 1 STAge 1 SPAN (See PAge 22)
Hysteresis for Stage One.
(Difference between heating and cooling turning ON and OFF)
SP = 1: 0.5 degree
SP = 2: 1.0 degree
SP = 3: 1.5 degree
32