Advertisement
Configuration Tasks
Verifying the Configuration
You can verify the configuration and status of the controller by using the show controller commands as
detailed below.
When AUG mapping is AU-4, view information about the SONET controller using the
sonet controller sonet port/port-adapter/port [brief | tabular] command.
Router# show controller sonet 2/0/0
SONET 2/0/0 is up.
Channelized OC-3/STM-1 SMI PA
H/W Version :0.2.3, ROM Version :1.2
FREEDM version :2, F/W Version :1.2.0
Applique type is Channelized Sonet/SDH
Clock Source is Internal, AUG mapping is AU4.
Medium info:
Type:SDH, Line Coding:NRZ, Line Type:Short SM
Regenerator Section Status:
No alarms detected.
Multiplex Section Status:
No alarms detected.
Higher Order Path Status:
Path# 1 has no defects
Lower Order Path Status:
VC-12 1/1/1/1 has no defects
VC-12 1/1/1/2 has no defects
VC-12 1/1/1/3 has no defects
VC-12 1/1/2/1 has no defects
VC-12 1/1/2/2 has no defects
VC-12 1/1/2/3 has no defects
[display text omitted]
Data in current interval (137 seconds elapsed):
Regenerator Section:
Multiplex Section:
Higher Order Path:
Lower Order Path:
[display text omitted]
SONET 2/0/0
No alarms detected.
Framing is crc4, Clock Source is internal, National bits are 0x1F.
Data in current interval (137 seconds elapsed):
SONET 2/0/0
No alarms detected.
Framing is crc4, Clock Source is internal, National bits are 0x1F.
12.0(14)S
14
0 CVs, 0 ESs, 0 SESs, 0 SEFSs
0 CVs, 0 ESs, 0 SESs, 0 UASs
Path# 1: 0 CVs, 0 ESs, 0 SESs, 0 UASs
VC-12 1/1/1/1: 0 CVs, 0 ESs, 0 SESs, 0 UASs
VC-12 1/1/1/2: 0 CVs, 0 ESs, 0 SESs, 0 UASs
VC-12 1/1/1/3: 0 CVs, 0 ESs, 0 SESs, 0 UASs
VC-12 1/1/2/1: 0 CVs, 0 ESs, 0 SESs, 0 UASs
E1
1/1/1/1 is up
0 Line Code Violations, 0 Path Code Violations
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs
0 Unavail Secs
E1
1/1/1/2 is up
Multichannel STM-1 Port Adapter for the Cisco 7500 Series Router
Advertisement
