Advertisement
Connecting the Cisco Network Interface Module
Adapter for SM-X Slot on the Cisco 4000 Seris
Integrated Services Routers
July 27, 2016
This document provides information that you should know before and during the installation of the
Cisco Network Interface Module Adapter for SM-X Slot (SM-X-NIM-ADPTR) on the Cisco 4000 Series
Integrated Services Routers (ISRs). This document contains the following sections:
•
•
•
•
•
•
•
Overview of the SM-X-NIM-ADPTR
The SM-X-NIM-ADPTR acts as a carrier card for the Cisco 4000 Series ISRs to carry one single-wide
or double-wide network interface module (NIM) to be used in the ISRs SM slot.
The SM-X-NIM-ADPTR converts the SM slot on the ISR to a NIM slot and facilitates the use of NIMs
such as the T1/E1 (Voice/Data), FXO/FXS, Switching, Serial, Storage Drives, Mobility (3G/4G), or
G.HDSL.
Cisco Systems, Inc.
www.cisco.com
Overview of the SM-X-NIM-ADPTR, page 1
LED, page 2
Installing the SM-X-NIM-ADPTR, page 6
Related Documents, page 9
Advertisement
Related Manuals for Cisco SM-X-NIM-ADPTR
Summary of Contents for Cisco SM-X-NIM-ADPTR
-
Page 1: Table Of Contents
(NIM) to be used in the ISRs SM slot. The SM-X-NIM-ADPTR converts the SM slot on the ISR to a NIM slot and facilitates the use of NIMs such as the T1/E1 (Voice/Data), FXO/FXS, Switching, Serial, Storage Drives, Mobility (3G/4G), or G.HDSL. -
Page 2: Led
The LED turns green when the NIM is inserted into Note the SM-X-NIM-ADPTR. If the SM-X-NIM-ADPTR is empty, the LED does not display the green light. Connecting the Cisco Network Interface Module Adapter for SM-X Slot on Cisco 4300 and 4400 Series Integrated Services Routers... -
Page 3: Recommended Practices For The Sm-X-Nim-Adptr
Determine the condition of the victim and send another person to get medical aid or call for – help. Determine if the person needs rescue breathing or external cardiac compressions; then take – appropriate action. Connecting the Cisco Network Interface Module Adapter for SM-X Slot on Cisco 4300 and 4400 Series Integrated Services Routers... - Page 4 Use the statement number provided at the end of each warning to locate its translation in the translated safety warnings that accompanied this device. Statement 1071 SAVE THESE INSTRUCTIONS Connecting the Cisco Network Interface Module Adapter for SM-X Slot on Cisco 4300 and 4400 Series Integrated Services Routers...
- Page 5 Metal objects will heat up when connected to power and ground and can cause serious burns or weld the metal object to the terminals. Statement 43 Connecting the Cisco Network Interface Module Adapter for SM-X Slot on Cisco 4300 and 4400 Series Integrated Services Routers...
-
Page 6: Software Requirements For The Sm-X-Nim-Adptr
Cisco IOS XE Release 3.14 or later release is required to operate the SM-X-NIM-ADPTRon a Cisco ISR. To determine the version of Cisco IOS software that is running on your ISR, log in to the ISR, and the enter the show version command: Router>... - Page 7 With the FXS NIM, Service-Engine (x/x/x) interface is created. Do not use the crypto map Note (name) CLI on the Service-Engine (x/x/x) interface module. Connecting the Cisco Network Interface Module Adapter for SM-X Slot on Cisco 4300 and 4400 Series Integrated Services Routers...
-
Page 8: Removing The Sm-X-Nim-Adptr From A Cisco 4000 Series Isr
Locate the SM-X-NIM-ADPTR to be removed. Step 3 Using a number 1 Phillips or flat-blade screwdriver, unscrew the captive mounting screws on the module faceplate. Connecting the Cisco Network Interface Module Adapter for SM-X Slot on Cisco 4300 and 4400 Series Integrated Services Routers... -
Page 9: Related Documents
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. - Page 10 Connecting the Cisco Network Interface Module Adapter for SM-X Slot on the Cisco 4000 Seris Integrated Services Connecting the Cisco Network Interface Module Adapter for SM-X Slot on Cisco 4300 and 4400 Series Integrated Services Routers...