WIRING CONNECTION
16
Connecting the cable to Outdoor Unit
Remove the side panel for wiring connection.
Use the cord clamp to fix the cord.
Earthing work
- Case 1 : Terminal block of Outdoor Unit have
Connect the cable of diameter 1.6mm
control box and do earthing.
- Case 2 : Terminal block of Outdoor Unit don't have
Connect the cable of diameter 1.6mm
and fasten with earth screw
Power cord
terminal
UU18W/UU18WE/UU24WE
Power cord
terminal
Tubing Cover
UU09W/UU12W
CAUTION
!
• The circuit diagram is not subject to change without notice.
• Be sure to connect wires according to the wiring diagram.
• Connect the wires firmly, so that They won't be pulled out easily.
• Connect the wires according to color codes by referring the wiring diagram.
• The Power cord connected to the unit should be selected according to the specifications
on 13 page.
mark.
2
or more to the earthing terminal provided in the
2
or more, to the panel of control box, marked as
Connecting cable
terminal
Cord clamp
Cover control
Tubing Cover
Connecting cable
terminal
Cord clamp
mark.
Power cord
terminal
* Make sure the rubber
bushes are Properly
used in knock-out holes
after connecting main
Power cable
UU24W/UU30W
Connecting
cable terminal
Cord clamp
Cord clamp