Description; Introduction - Nordson A7A Customer Product Manual

4
A7A Lancing Spray Guns

Description

Introduction

The Nordson A7A Lancing Spray Guns are
air-operated, high-cycle, airless spray guns used
primarily in the aerosol container industry. The
guns are available in a standard model, the A7A
Circulating Lancing Spray Gun, and in a
non-circulating iTRAX r compatible model, the A7A
Spray Monitor (SM) Lancing Spray Gun.
The guns are designed to spray solventborne or
waterborne coatings. They are constructed of
stainless steel with a 293 mm (11.53 in.)
extension.
Figure 1 A7A Lancing Spray Guns
Part 107009-05
A7A Circulating Lancing Spray Gun (Shown without Nozzle)
A7A Spray Monitor (SM) Lancing Spray Gun (Shown without Nozzle)
An optional air-release valve can be used for quick
gun response over long distances.
NOTE: These spray guns use Nordson Tube
Lining Cross-Cut nozzles. The nozzles are optional
and must be ordered separately. Contact your
Nordson representative for nozzles suited for your
application.
E 2018 Nordson Corporation