Fault Finding / Maintenance; Service / Maintenance; Cleaning, Disinfection And Sterilisation - Prism Medical UK SA160C User Manual

Fault Finding / Maintenance

Fault Finding
If the hoist will not operate:-
ENSURE THE BATTERY IS CHARGED AND THAT IT IS ATTACHED

CORRECTLY TO THE CONTROL BOX
ENSURE THAT STOP BUTTON IS IN THE OUT POSITION.

MAKE SURE THE CHARGING LEAD IS DISCONECTED FROM THE

MAINS POWER SUPPLY
CHECK THE HANDSET LEAD HAS NOT BEEN PULLED FROM THE

CONTROL BOX SOCKET OR WIRES DAMAGED
If the above checks prove unsuccessful, please contact Prism Medical UK.

Service / Maintenance

Any works performed on the SA160C Stand aid must be in accordance with the
specifications detailed in the test requirements of BS 10535: 2006
You should also consider if the hoist requires servicing in accordance with
"LOLER REGULATIONS" (Lifting Operations and Lifting Equipment Regulations
1998).

Cleaning, Disinfection and Sterilisation

Routine cleaning: the exterior of the hoist can be wiped over with a damp

cloth containing a mild soap solution.
Disinfection and Sterilisation: the exterior of the hoist should only be,

disinfected and sterilised using Isopropyl alcohol. Dampen a cloth with isopropyl
alcohol and wipe down the entire exterior of hoist.
DO NOT USE ABRASIVE MATERIALS
DO NOT IMMERSE THE HOIST IN WATER
SA160C User guide
Tel: 01924 840100
Rev 02 - June 2017 Page 9