Table of Contents
Advertisement
Delivery and Unpacking of the SA160C Stand aid
The Stand aid has been delivered to you
as a complete hoist unit, so no assembly
is required. However, you may need to
charge the battery before using the hoist.
If so, connect the charger unit to the
control box and mains, ensure that the
Emergency stop is in the out position
and allow the battery to recharge for 2
hours prior to use.
WARNING
Take care whilst removing the SA160C as the hoist weight is 40Kgs and may need two
people to remove from its packaging
SA160C User guide
Rev 02 - June 2017
Page 3
Advertisement
Table of Contents
