Dialing And Transmission - Sharp UX-600M Operation Manual

Multifunction facsimile
Hide thumbs Also See for UX-600M:
Table of Contents

Advertisement

Dialing and Transmission

Once you have loaded the document and made any desired transmission set-
tings, you are ready to dial the number of the receiving fax machine and trans-
mit the document. There are several ways of dialing, and you can select the one
which best suits your needs.
Normal Dialing
With Normal Dialing, you pick up the handset (or press the SPEAKER key)
and dial as you would to make a telephone call. If the receiving machine is set
to receive faxes manually (this means that the receiving party answers your call
by picking up the handset and speaking, and then presses their Start key to begin
fax reception), you can talk with them before sending the fax.
1
Pick up the handset or press the
SPEAKER key. Listen for the dial tone.
2
Dial the number of the receiving ma-
chine by pressing the number keys.
3
Wait for the connection. Depending on
the setting of the receiving machine, you
will either hear a facsimile reception
tone or the other person will answer.
If the other party answers, ask them to
press their Start key (if you pressed
the SPEAKER key, pick up the hand-
set to speak with them). This causes
the receiving machine to issue a recep-
tion tone.
Chapter 3
Sending Documents
or
ABC
2
1
GHI
JKL
4
5
PQRS
TUV
7
8
0
Beep
SPEAKER
DEF
3
MNO
6
WXYZ
9
37

Advertisement

Table of Contents
loading

Table of Contents