Table of Contents
Advertisement
Timer Operations
The Timer function allows you to set a transmission and/or polling operation to
be performed automatically at a time you specify. One transmission operation
and one polling operation can be set at the same time, and the times they will be
performed can be specified up to 24 hours in advance.
As an example, you can use this function to take advantage of off-peak tele-
phone rates without having to be there when the operation is performed.
Note: Only a Speed Dial number can be used to dial the receiving machine.
Setting a timer operation
1
Press the keys shown at right.
TIMER MODE will appear in the dis-
play.
2
Press "#" to set a transmission operation
(SEND MODE), or "
operation (POLLING MODE).
3
Press "1" to select SET.
4
Enter the time at which you want the op-
eration to take place (2 digits for the
hour and 2 digits for the minute).
*
5
Press "
" to select A.M., or "#" to select
P.M.
6
Press the START key.
*
" to set a polling
Chapter 8
Special Functions
FUNCTION
1
or
1
9
0
(Example: 9:25)
or
START
2
5
67
Advertisement
Table of Contents
