The "Extra" - Menu - Dometic UF 755G Operating Instructions Manual

USER PASSWORD
CHANGE USER PASSWORD:
0XXX
XXXX
CALIBRATION
CALIBRATION PASSWORD:
0XXX
T T h h e e " " E E X X T T R R A A " " - - M M e e n n u u
• The "EXTRA" menu only contains parameters without influence on the function of
the appliance and are therefore accessible for any use without a password.
press the MENÜ-key
"EXTRA"
select
HISTORY
SHOW HISTORY
DELETE HISTORY
DELETE HISTORY:
NO YES
BUZZER
VOLUME
BUZZER VOLUME
MUTE TIME
MUTE TIME : 0
DISPLAY
BRIGHTNESS
DISPLAY BRIGHTNESS
- I +
CONTRAST
DISPLAY CONTRAST
- I +
POS / NEG
POSITIVE
BACKL. TIMEOUT
TIME OUT: : 0
60
NEGATIVE
127
Changing the password to access the "SETTINGS"
MENU.
Enter the new password twice and confirm.
This function is for calibrating the sensors. As each
setting in the calibration compromises the function of
the appliance, this function is protected by a password
in the factory and must only be used by trained service
staff!
Enter the password to the calibration menu
(see chapter "Alarm history" for further details)
Display for alarm situations. With the aid of the UP- and
DOWN buttons you can scroll down the list
YES : deletes the entire history data.
Setting the volume of the acoustic alarm signal
On the occurrence of an alarm, the acoustic signal can
be switched off for a given time by activating the ENTER
button. The given time is determined by this parameter.
It can be changed from 0 to 60 minutes in stages of1I
minute.
Setting the parameters for the display
Setting the brightness with the
Setting the contrast with the
Changing the display from positive (blue/white) to
negative display (white/blue).
Duration of the display indication on pressing the button
during a power failure.
(100 = approx. 10 Sec, 50 = approx. 5 Sec.)
(see chapter " Alarm situations ")
and keys.
and keys.
9