Status- And Warning Messages - Dometic UF 755G Operating Instructions Manual

VOLTAGE IND.
LINE VOLTAGE
AMBIENT PROBE
AMBIENT
ADD.PROBE
NONE
REGULATION
HEAT EXCH.
RESOLUTION
RES.: 0.1°
TEMP. UNIT
CELSIUS
LANGUAGE
ENGLISH
GERMAN
FRENCH
DUTCH
ITALIAN
SPANISH
PORTUGUESE
DANISH
SWEDISH
NORWEGIAN
FINNISH
MALAYSIAN
RUSSIAN
DIAGNOSTICS
PARAMETERS
S S t t a a t t u u s s - - a a n n d d W W a a r r n n i i n n g g m m e e s s s s a a g g e e s s
• The electronics generate various status or
warning messages depending on the setting or
the condition of the appliance.
DOOR OPEN
HISTORY
10
NONE
NONE
1°
FAHRENHEIT
This message appears as soon as the door of the appliance is
opened. If the door is not closed again after a preset time, an alarm is
triggered. This alarm is not entered in the history list.
The message or the alarm disappears as soon as the door is
closed.
This message indicates that a new entry has been made in the alarm
history list. The message disappears as soon as the history has been
displayed once with the function "SHOW HISTORY".
Shows the input voltage of the appliance on the display.
If an ambient temperature sensor is connected to the
appliance , the temperature measured by this sensor
can be indicated on the display.
Enables the additional display of the temperature
values of one of the following sensors (if connected):
No value is displayed.
The value of the regulation sensor is displayed.
The value of the sensor on the heat exchanger is
displayed.
Setting the resolution of the temperature display. The
temperature can be displayed with or without decimal
place.
Display of the temperature value in °Celsius or in
°Fahrenheit.
Changing the menu language.
Display of the current status of the appliance
(only for service purposes).
Display of the current setting of all parameters
(only for service purposes).
• If one or several messages are to be displayed at
the same time in one line, these messages
appear alternately on the display.