General Safety Warning - Techman Robot TM5 Series Manual Book

1.5 General Safety Warning

The following shows the general warnings and cautions. Note that there may be related warnings and
cautions listed in the remaining sections, in addition to the ones described in this section. Read them
carefully as well.
Danger
1. Before handling, installation, operating, maintaining and servicing this product, carefully read the
product's specifications and operating manual. Make sure that all conditions meet the requirements of
the specifications and manual to avoid unexpected accidents during use (e.g. improper operation or
operating conditions that exceed the product specifications) that may cause personnel injury or
damage to this product.
2. Before using and installing this product, the installer must perform the necessary risk assessments
based on the conditions of use to avoid serious personal injuries during operation (e.g. Collision
between equipment and personnel) due to improper parameter settings.
Warning
1. Before using this product, make sure that there is at least 1 or more emergency stop device on the
machine to stop the movement of the robot in case of accidents. Always make sure that the devices
are functioning properly.
2. Prior to assembly and disassembly, or servicing and maintenance of this product, make sure that the
power is disconnected and the rear area is clear before proceeding. Doing so will help prevent injury
to personnel or damage to equipment due to accidental short-circuits or electrocution during use.
3. When operating this product, the operator should not wear loose clothing or other accessories (e.g.
necklaces, ties,and bracelets) to avoid injuries which may happen when said clothes or accessories
are drawn into the machine during operation.
4. In the event of product malfunction, follow the proper procedures and channels to contact qualified
personnel for troubleshooting and repair. To prevent damage to the equipment due to improper
disassembly, the operator is strictly prohibited against attempting to make direct repairs.
I Hardware Installation Manual 1. Safety Information
3