Chapter 2
Configure the XM-124 Standard Dynamic Measurement Module
64
Figure 35 - Application Help Dialog Box
For help on topics other than module configuration, consult the back cover of
this manual for contact information for Rockwell Automation® Support and
Installation Assistance.
Module Selection and Connection
The XM Serial Configuration Utility welcome screen is shown in
The software version that is used for the XM-124 module can vary from the
figure, but the release number must be at least 7.0.0.
Figure 36 - 1XM Serial Configuration Utility Main Dialog Box
A closed connector icon indicates a computer connection to an XM-124
module, and the application allows only configuration of that specific module.
If no module is connected, as in
configuration files for any type of module.
Rockwell Automation Publication 1440-UM001D-EN-P - September 2016
Figure
36, the tool can be used to edit
Figure
36.