Finisher (Ar-Fn1N); Part Names; Specifications - Sharp AR-287 Operation Manual

FINISHER (AR-FN1N)

The copier has two different finisher modes: one sorts copies into sets matching the sequence of the originals and the
second groups copies by original. When the optional finisher (AR-FN1N) is installed, the copier can automatically
staple the sorted copies. Each collated set of copies or group of copies can be stacked offset from the previous set.

PART NAMES

Second tray
(not used in the copy mode)
Offset tray
When copying onto size 11" x 17"
paper, lower the metal support
located at the tip of the offset tray.
The top tray and second tray are each furnished with an extendable component, which is to be used when copying
onto size 11" x 17" paper.

Specifications

Top cover
Top tray
Finisher release lever
Tray capacity
Paper size
Paper weight
Offset
Paper size
for stapling
Stapling capacity 50 sheets (20 lbs.)
Power supply
Weight
Dimensions
Specifications are subject to change for improvement without notice.
Paper transport area cover
Stapler unit
Top tray: 500 sheets
Second tray: 500 sheets
Offset tray: 1,500 sheets (8-1/2" x 11")
750 sheets (larger than 8-1/2" x 11")
Top tray: 5-1/2" x 8-1/2" to 11" x 17"
Second tray: 5-1/2" x 8-1/2" to 11" x 17"
Offset tray: 8-1/2" x 11" to 11" x 17"
Top tray: 14 lbs. to 34 lbs. (when face up)
17 lbs. to 28 lbs. (when face down)
Second tray: 17 lbs. to 28 lbs.
Offset tray: 17 lbs. to 34 lbs. (when face up)
17 lbs. to 28 lbs. (when face down)
For paper weighing more than 28 lbs., 8-1/2" x 11" is
the maximum size.
1.2 inch (30 mm)
8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 14", 11" x 17"
(25 sheets for 8-1/2" x 14" and 11" x 17" paper)
Drawn from the copier
Approx. 111 lbs. (50 kg)
23-15/64"(W) x 22-1/16"(D) x 39-19/64"(H)
(590 mm (W) x 560 mm (D) x 998 mm (H))
Paper feed area cover
7-3