F
Place the originals, and then press the {Start} key.
G
When the copy job is finished, press the {Clear Modes} key to clear the settings.
H
Close the bypass tray.
Using the One-Sheet Bypass Tray
You can use the one-sheet bypass tray to load OHP transparencies as well as pa-
per that can be loaded in the paper trays.
Important
❒ When copying from the one-sheet bypass tray, remove copied sheets one by
one.
❒ When copying on OHP transparencies or paper heavier than 104.7 g/m
you need to specify the type and size of paper.
A
Open the bypass tray.
B
Open the one-sheet bypass tray.
The one-sheet bypass tray is selected on the display.
Do not open one-sheet bypass tray while the machine is in operation.
ALZ037S
ALZ030S
Copying from the Bypass Tray
2
(about 28 lb.),
2
23