Safety and Regulatory Information
Safety and Regulatory Information
Introduction
Review this product and related documentation to familiarize yourself with safety markings and
instructions before you operate the instrument.
This product has been designed and tested in accordance with accepted industry standards, and has been
supplied in a safe condition. The documentation contains information and warnings that must be followed
by the user to ensure safe operation and to maintain the product in a safe condition.
Safety Earth Ground
WARNING
CAUTION
Declaration of Conformity
A copy of the Declaration of Conformity is available upon request, or a copy is available on the Agilent
Technologies web site at http://regulations.corporate.agilent.com/DoC/search.htm
Statement of Compliance
This instrument has been designed and tested in accordance with CAN/CSA 22.2
No. 61010-1-04, UL Std No. 61010-1 (2nd Edition).
6
This Manual:http://www.manuallib.com/agilent/e8257ds02-s15-source-modules-user-guide.html
This is a Safety Class I Product (provided with a protective earthing ground incorporated
in the power cord). The mains plug shall be only be inserted in a socket outlet provided
with a protective earth contact. Any interruption of the protective conductor inside or
outside of the product is likely to make the product dangerous. Intentional interruption is
prohibited.
Always use the three prong AC power cord supplied with this product. Failure to ensure
adequate earth grounding by not using this cord may cause product damage and the risk of
electrical shock.
E8257DS02-S15
User's Guide E8251-90283