System Setup - Agilent Technologies E8257DS02 User Manual

E8257DS02-S15

System Setup

1. Connect the interface cable (included with this option) from the millimeter-wave source module and to
the rear panel on the PSG. Refer to
2. Connect the RF cable (included with this option) from the SMA RF Input connector on the
millimeter-wave source module to the RF Output connector on the PSG, using the adapter listed in
Table
Figure 1
Figure 2
User's Guide E8251-90283
This Manual:http://www.manuallib.com/agilent/e8257ds02-s15-source-modules-user-guide.html
1. Refer to Figure 2.
Interface Cable Installation
Interface Cable
Source Module Interface Connector
RF Cable Installation
Figure 1.
System Setup
RF Cable
Millimeter
Source RF Output
RF Cable
3