Siemens LR200 Quick Start Manual page 17

Key Function
Updates the loop cur-
rent.
Updates internal
enclosure tempera-
ture reading.
Updates echo confi-
dence value.
Updates distance mea-
surement.
Programming SITRANS LR200
: SITRANS LR200 automatically returns to Measurement mode after a period of
Note
inactivity in PROGRAM mode (between 15 seconds and 10 minutes, depending on the menu
level).
Settings can be modified locally via the Local User Interface or remotely via SIMATIC PDM.
The Local User Interface (LUI) consists of an LCD display and a handheld programmer.
Quick Start Wizard via the handheld programmer
• See
Quick Start Wizard via SIMATIC PDM
• See
Parameter menus
Note:
For the complete list of parameters with instructions, see the full manual. It can be
downloaded from the product page of our website at: www.siemens.com/LR200.
Parameters are identified by name and organized into
function groups, then arranged in a 5-level menu
structure.
Accessing parameters via the handheld programmer
1. Enter PROGRAM mode
a) Point the programmer at the display from a maximum distance of 300 mm (1 ft).
b) Press RIGHT arrow
Page EN-16 SITRANS LR200 (HART) – QUICK START MANUAL
Result
New value is displayed in LCD secondary region.
on page 21.
to open menu level 1.
on page 18.
1. QUICK START
2. SETUP
3. DIAGNOSTICS
3.14. MEAS. VALUES
3.14.1. CURR. INTERN. TEMP.
7ML19985XC81