Siemens LR200 Quick Start Manual page 16

Parameter view
MATERIAL
parameter
name
PREVIOUS
BACK
Handheld Programmer
(Part No. 7ML1930-1BK)
The programmer is ordered separately.
• Point the programmer at the display (from a maximum
distance of 300 mm [1 ft.]).
• Press Mode to toggle between Measurement
and PROGRAM mode.
handheld programmer
Max. 300 mm
(1 ft)
Key functions in Measurement mode
Key Function
Mode opens PRO-
GRAM mode.
RIGHT arrow
opens PROGRAM
mode.
UP or DOWN arrow
toggles between linear
units and percent.
7ML19985XC81
1.1
LIQUID
EDIT
NEXT
display
Result
Opens the menu level last displayed in this power cycle, or
menu level 1 if power has been cycled since exiting PRO-
GRAM mode or more than 10 minutes have elapsed since
PROGRAM mode was used.
Opens menu level 1.
LCD displays measured value in either linear units or per-
cent.
SITRANS LR200 (HART) – QUICK START MANUAL
Edit view
parameter
number
parameter
value/
selection
C
MATERIAL
1.1
LIQUID
LIQUID LOW DK
Page EN-15