Seek Tuning; Manual Tuning - Sangean DT-800 Manual

Tuning the radio

Seek Tuning

● Turn your radio on by pressing and releasing the Power button
located on the top of the radio.
● Select the desired band by pressing the Band selector button.
● Press the tuning button up or down then press the SELECT button to
confirm seek tuning, radio will seek and stop at the next active signal
station.
● Repeat as many times as desired.

Manual Tuning

● Turn your radio on by pressing and releasing the Power button.
● Select the desired band by pressing the Band selector button.
● Press the Tuning button up or down repeatedly until the desired frequency
is found.
016