Almset - Alarm Set; 12 / 24 H – (12 Hour Or 24 Hour Clock Format); Tim 90 (Auto Off) - Sangean DT-800 Manual

Settings in MENU
● ALMSET (alarm set) –When the display flashes MENU and ALMSET
appears, press the SELECT button to set the required alarm clock
time, the display will flash the hour digits, press the TUNING up or
down button to select the required alarm hour. Press the SELECT
button again to confirm the alarm hour setting. The Display will flash
the minute digits; press the TUNING up or down button to select the
required alarm minute then press the SELECT button to complete
the alarm time clock setting. The Display will show the ALARM icon
indicating the alarm clock time is set.
When the alarm is active, it can be cancelled by pressing the Power
button. To cancel the Alarm setting, press and hold the PAGE / MENU
button to enter the MENU and ALMSET, press and release Preset 5 /
Alarm button, the ALARM icon will disappear from the display indicating
the Alarm set has been cancelled. You may press and release the
PAGE / MENU button back for real time.
NOTE
Only after the real time clock is set, you are able to enter ALMSET
(alarm time set) mode.
● 12 / 24 H – (12 hour or 24 hour clock format)
Press the SELECT button and press the TUNING up or down button
to select CLK 12H or CLK 24H. Press the SELECT button to confirm
12 hour or 24 hour clock format.
● TIM 90 (Auto Off) – Press the SELECT button, the display will flash 90
(radio auto off at 90 minutes of operation). Press the TUNING up or
down button to cycle through 90-120-OFF-15-30-45-60-90. Press the
SELECT button to select the auto off timer time. The Auto off symbol
will appear on the display. You can select OFF for non-stop radio
listening, or the radio will turn itself off at the selected auto timer time.
Press the Power button to continue listening.
021