Sangean DT-800 Manual page 20

Table of Contents

Advertisement

Weather Band and weather alert
operation (USA version only)
REMARKS
To get your local weather station information, you can visit NOAA's
website at http://www.nws.noaa.gov/nwr
To get a better signal, it is recommended to plug in the supplied FM
wire antenna into the earphones jack.
2.
When the radio is in the weather band mode, press and hold the
BAND button until ALERT appears on the display. Continuously
press and hold the BAND button, this will cycle through the required
2-4-6-8-16 H (hour) of ALERT time. Release the BAND button when
the required alert time is chosen. The Display will appear with ALERT
indicating the weather alert function is activated.
3.
When the weather alert sounds, press any button to enter the
weather band.
4.
When the set Alert time has elapsed, the Alert is deactivated and
ALERT disappears from display.
5.
To cancel a weather alert, press and hold the BAND button until the
display appears OFF and ALERT disappears from display.
019

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents