Titling A Minidisc - Sharp MD-MT180H Operation Manual

Titling a MiniDisc

MD-MT180H
ENGLISH


Creating disc and track names
Load a MiniDisc to be named. A playback only or record-
ing prevented MiniDisc cannot be edited.
1 <Disc name>
Whilst in the stop
mode, press the
MENU/CHRG button to
select "EDIT".
2
Press the ENTER/SYNC button.
3
<Disc name>
Press the MENU/CHRG
button to select "DISC
NAME".
4
Press the ENTER/SYNC button.
Cursor


The unit will enter the character input mode.


To cancel the operation, press the :OFF/HOLD
button.
E-27
5
Press the
of characters.
<Track name>
Whilst in the pause
mode, press the
(Capital letters) (Lower-case letters) (Numbers and symbols)
MENU/CHRG button to
select "EDIT".
The first 3 characters in the group of the selected
characters will be displayed for about 1 second.
6
<Track name> Press the
Press the MENU/CHRG
the letter.
button to select
"TRACK NAME".
7
Press the ENTER/SYNC button to enter it.
Position where the next letter will be entered
Note:


Complete the operation within 7 seconds whilst se-
lecting the menus.
button repeatedly to select the type
or button repeatedly to select
01/10/11 180H_E_5.fm