SMART FORTWO 2018 Owner's Manual page 99

Use this setting only until the rear window
is clear again.
Drying windows that are misted up on
the inside
X
Turn control : to z.
Use this setting only until the windows are
clear again.
Drying windows that are misted up on
the outside
X
Switch on the windscreen wipers.
X
Turn control : to z.
Use this setting only until the windows are
clear again.
Operating the automatic climate con-
trol system
Switching the automatic climate control
system on/off
The ignition must be switched on in order
to operate the blower. The engine must be
running in order to operate all the func-
tions of the automatic climate control sys-
tem.
X
To switch on: press the à button.
The indicator lamps below à and
¿ light up.
X
To switch off: press the ^ button.
The indicator lamp below ^ lights up.
Operating the climate control system
Setting the temperature
X
Move the slider in small increments to
the left or right.
In automatic mode, the set temperature is
maintained at a constant level. The air dis-
tribution and blower speed are regulated
automatically.
Setting and switching the air distribu-
tion off
X
Press one or more of the buttons.
The following options can be selected:
¯ Demister vents
R
P Centre and side air vents
R
O Footwell vents
R
Increasing the blower speed
X
Press the K button.
Decreasing the blower speed
X
Press the I button.
Switching air-recirculation mode on/off
X
Press the À button.
The indicator lamp above À lights up
when air-recirculation mode is activated.
Switching "Cooling with air dehumidifi-
cation" on or off
The "Cooling with air dehumidification"
function cools and dehumidifies the air
inside the vehicle during warm weather.
The engine must be running in order to use
"Cooling with air dehumidification".
X
To switch on: press the K and
¿ button.
The indicator lamp below ¿ lights up
when the function is activated.
In damp weather, only switch off the "Cool-
ing with air dehumidification" function
briefly. Otherwise the windows can mist up
more quickly.
97
Z