Table of Contents
Advertisement
Using smart "ready to" services
Useful information
smart "ready to" services are only available
in certain countries.
The functions are enabled via a communi-
cation module and the smart "ready to" app.
Information and the Internet addresses for
the smart "ready to" services are available
at any smart Centre.
i
If you are already using a smart "ready
to" service, additional services can be
activated with your user details in the
usual web portal or via the app.
The communication module and activation
are required in order to use the smart
"ready to" services:
Register on the "ready to" web portal.
R
A valid e-mail address and the vehicle
identification number (VIN) are neces-
sary for registration, and the terms of use
must be accepted.
Install the "ready to" app on your smart-
R
phone and create a user account.
Using the Key Card Holder
Key Card Holder : is located in the glove
compartment and is intended for the stor-
age and inventory of the vehicle key and up
to two cards (e.g. fuel card, parking card or
car wash card).
The inventory is available within certain
smart "ready to" services.
For an inventory, the key and/or the cards
must be equipped with an RFID tag.
Further information about RFID tags is
available from any smart Centre.
Using smart "ready to" services
143
Advertisement
Table of Contents
