Table of Contents
Advertisement
Selecting settings to start Android Auto™
®
and MirrorLink
X
System
Smartphone Screen
Select
>
Android Auto™
Settings.
or
X
System
Smartphone Screen
Select
>
MirrorLink™
Settings.
X
Start smartphone screen application
Select one of the following settings:
Ask me at each launch
R
If the smartphone has been connected
with the smart Media-System, you will
be asked whether the preferred smart-
phone screen application should be
started.
Yes
R
If the smartphone has been connected
with the smart Media-System, the pre-
ferred smartphone screen application
will be started automatically.
No
R
If the smartphone has been connected
with the smart Media-System, a smart-
phone screen application will not be
started.
®
Using MirrorLink
Useful information
®
MirrorLink
is a standard for the connec-
tion between the smart Media-System and a
mobile phone. With MirrorLink
tent of the display on your mobile phone
can be displayed in the smart Media-Sys-
tem.
®
MirrorLink
is available for mobile phones
with the Android™ operating system.
Further information: http://
www.smart.com/connect.
®
To use MirrorLink
, observe the following
requirements:
the mobile phone must support Mirror-
R
®
Link
version 1.1 and above
the mobile phone is switched on
R
®
a MirrorLink
certified app must be
R
installed on the mobile phone
the GPS connection must be activated on
R
the mobile phone
the time is set on the smart Media-Sys-
R
>
tem
Setting up a connection
>
X
Activate MirrorLink
phone (see the manufacturer's operating
instructions).
X
Connect a mobile phone with a connect-
ing cable to the USB socket in the centre
console.
X
Select Yes.
Apps which have been certified for Mir-
rorLink
Media-System display.
Calling up MirrorLink
X
Tap 0 on the home page of the smart
Media-System.
MirrorLink
System display.
X
Select the desired app.
The display switches to full screen mode.
X
To leave full screen display: press and
hold the ò button on the smart Media-
System until the lower bar is shown.
X
To leave the display: select 2.
MirrorLink
If your mobile phone supports this func-
tion, you can control audio playback via the
buttons on the smart Media-System.
®
, the con-
X
To select the previous track: press the
9 button.
X
To rewind: press and hold the 9 but-
ton.
X
To select the next track: press the :
button.
X
To fast forward: press and hold the :
button.
X
To mute: press the 8 button.
Terminating a MirrorLink
X
Select W > Disconnect.
Using a mobile phone
®
on your mobile
®
will be shown in the smart
®
apps
®
starts in the smart Media-
®
audio playback
®
connection
127
Z
Advertisement
Table of Contents
