SMART FORTWO 2018 Owner's Manual page 175

Table of Contents

Advertisement

Please note
G
WARNING
In the following situations, the tyre seal-
ant is unable to provide sufficient break-
down assistance, as it is unable to seal
the tyre properly:
there are cuts or punctures in the tyre
R
larger than those mentioned above.
the wheel rim is damaged.
R
you have driven at very low tyre pres-
R
sures or on a flat tyre.
There is a risk of an accident.
Do not drive any further. Contact a quali-
fied specialist workshop.
G
WARNING
The tyre sealant is harmful and causes
irritation. It must not come into contact
with your skin, eyes or clothing or be
swallowed. Do not inhale TIREFIT fumes.
Keep tyre sealant away from children.
There is a risk of injury.
If you come into contact with the tyre
sealant, observe the following:
Rinse off the tyre sealant from your
R
skin immediately with water.
If the tyre sealant comes into contact
R
with your eyes, immediately rinse them
thoroughly with clean water.
If tyre sealant is swallowed, immedi-
R
ately rinse your mouth out thoroughly
and drink plenty of water. Do not
induce vomiting, and seek medical
attention immediately.
Immediately change out of clothing
R
which has come into contact with tyre
sealant.
If an allergic reaction occurs, seek
R
medical attention immediately.
G
WARNING
A tyre temporarily sealed with tyre seal-
ant impairs the vehicle's driving charac-
teristics and is not suitable for driving at
Sealing tyres using the TIREFIT kit
higher speeds. There is a risk of an acci-
dent.
Adapt your driving style accordingly and
drive carefully. Do not exceed the maxi-
mum permissible speed for a tyre sealed
with tyre sealant.
The maximum permissible speed for a tyre
sealed with tyre sealant is 80 km/h.
!
After use, excess tyre sealant may run
out of the filler hose. This could cause
stains.
Therefore, place the filler hose in the
plastic bag that contained the TIREFIT
kit.
H
Environmental note
Have the used tyre sealant bottle dis-
posed of professionally, e.g. at a qualified
specialist workshop.
Comply with the manufacturer's safety
instructions on the sticker on the tyre
inflation compressor.
Using tyre sealant
X
Leave foreign bodies which have pene-
trated the tyre in the tyre.
X
Remove the vehicle tool tray.
X
Remove the TIREFIT kit, consisting of a
tyre sealant bottle and a tyre inflation
compressor, from the vehicle tool kit.
X
Affix the 80 km/h maximum speed sticker
to the instrument cluster within the driv-
er's field of vision.
173
Z

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fortwo cabrio 2018

Table of Contents