Timeguard TRT039N Installation & Operating Instructions Manual page 10

9. Programme Preparation (Headings)
9.1 Decide which heading suits best for the channels to be displayed. They
can be set as channels being channel 1, 2, 3 and 4, split as heating and
hot water being heating 1, heating 2, heating 3 and water as the fourth
channel as well as having an option for heating on the first 2 channels
(1 & 2) and water on the last two channels (3 & 4). Zones can be applied
to each channel as a heading being zones 1, 2, 3 and 4.
9.2 To implement this setting, press the menu button and select the settings
menu using the advance buttons marked beside the + and – indicators.
Press enter to confirm.
9.3 Once in the settings menu, select the headings option using the advance
buttons marked beside the + and – indicators and press enter.
9.4 Select the heading required using the advance buttons marked beside
the + and – indicators and press enter to confirm.
9
9.5 Once the heading is set, press the menu button until the main screen has
been reached.