Starting A Cycle Wash; Changing The Program Mid-Cycle - Midea MDWB1W Instruction Manual

Description
Program
Of Cycle
Rinse
Fruit wash
Wash(70℃)
Rinse
Rinse(65℃)
Self-cleaning
Drying
NOTE:
*AS/NZS 2007.1:

Starting A Cycle Wash

1. Draw out the lower and upper basket, load the dishes and push them back.
It is commended to load the lower basket first, then the upper one.
2. Pour in the detergent.
3. Insert the plug into the socket. The power supply refer to last page "Product fiche".
Make sure that the water supply is turned on to full pressure.
4. Close the door, press the Power button, to switch on the machine.
5. Choose a program, the response light will turn on. Then press the Start/Pause
button, the dishwasher will start its cycle.

Changing The Program Mid-cycle

A wash cycle can only be changed if it has been running for a short time otherwise,
the detergent may have already been released and the dishwasher may have already
drained the wash water. If this is the case, the dishwasher needs to be reset and the
detergent dispenser must be refilled. To reset the dishwasher, follow the
instructions below:
Detergent
Pre/Main
15g
(Or 1 piece)
This program is the test cycle. The information for comparability
test in accordance with
14
Energy
Running
(Kwh)
Time(min)
15 0.02
80 0.48
*AS/NZS 2007.1.
Water
Rinse
(L)
Aid
5
5