Filling The Rinse Aid Reservoir - Midea MDWB1W Instruction Manual

Filling The Rinse Aid Reservoir

Rinse-Aid indicator
1
To open the dispenser, turn the cap
to the "open" (left) arrow and lift
it out.
3
Replace the cap by inserting it
aligned with "open" arrow and
turning it to the closed (right) arrow.
Adjusting the rinse aid reservoir
Adjust lever(Rinse)
The rinse aid reservoir has six settings. The recommended
setting is "4". If the dishes are not drying properly or are
spotted, adjust the dial to the next higher number until
your dishes are spot-free.
Reduce it if there are sticky whitish stains on your dishes or
a bluish film on glassware or knife blades.
11
2
Carefully pour in the rinse-aid into
its dispenser, whilst avoiding it to
overflow.
NOTE:
Clean up any spilled rinse aid with
an absorbent cloth to avoid
excessive foaming during the next
wash.