Table of Contents
Advertisement
4-3 Extension installations and connections
1. Installation method of the expansion board:
Open the board's cover at the back of XP3 (As shown in the following graph), and then
install it according to the pin arrangement. Then fix it with screws, close the cover.
2. Connection format: As shown in the following graph:
Note:
Module's 0/20mA or 4/20mA output needs 24V power supplier from outside. According to
the QD value, the module adjusts the signal's current. However, the model itself doesn't
generate current.
XP3-BD User Manual
Page 24 of 30
Board's install
position
MANUL008R2V1
Advertisement
Table of Contents
