Xinje XP3-BD series Hardware Manual page 17

3-4 Assign input/output ID
This BD expansion does not use
also add two extra output points. Extra outputs do not include normal system's I/O output.
Channels correspond to the PLC register ID:
Channel Current
Temperature
0CH ID1000
1CH ID1001
Note:
1. Kp: proportion parameter, Ki: integral parameter, Kd: differential parameter; Diff: control
proportion band.
2. Control coil's status (Y1000/Y1001): 0 = means close PID control, 1 = means start PID
control.
Expansion's input has voltage 0/5V or 0/10V these two modes and filter form to select. Set
3.
via set the 4 channels' mode, each register has 16 bits. From low bit to high bit, each 4 bits set
one channel's mode
XP3-BD User Manual
I/O unit, the converted data is directly sent into PLC register,
Set Kp
Temperature
QD1000 QD1
001
QD1005 QD1
006
Page 17 of 30
Ki Kd Diff
QD1 QD1 QD1
002 003 004
QD1 QD1 QD1
007 008 009
Start/stop
Y1000
Y1001
MANUL008R2V1