6. QUICK ACCESS MENU
Finishing copy and duplex modes can be performed at the same time on one display by pressing the
1
QUICK button. The character and button sizes are enlarged, and the white characters are displayed on
the black background in order that you can easily operate the copier.
2
1
Place paper in the drawer(s).
2
Place the original(s).
3
3
Press the QUICK button to display the menu shown
on the right, then press a button to perform one of
4
the functions.
- The right menu shows "Non-sort and non-staple" and "one
side of the original is copied on one side of a sheet of paper."
5
- For the details of the functions, refer to the pages below.
[Finishing Mode]
Staple sort (staple at one corner)
Sort
6
[Duplex Mode]
7
For the functions of the finishing and duplex modes, which
are not shown on the display, set them on the basic screen.
- Finishing mode setting
8
- Duplex copying
Set up other copying modes as required.
4
Press the
9
10
11
12
3-14
SETTING OF BASIC COPY MODES
Page2-9
Page 6-3
Page3-7
Page 6-2
Page 3-7
START key.
Page2-4
Page 6-4