Table of Contents
Advertisement
•
<Esc>—Use this key to return to a parent menu of a submenu or cancel an outstanding
selection. At the main menu, use this key to exit the BIOS setup.
•
<+> and <->—Use these keys to cycle between all available settings.
•
<Tab>—Use this key to select time and date fields. When entering date and time and date
information, you can also use the number keys to enter the time and date directly.
•
<F9>—Use this key to load the optimal default values for BIOS configuration settings.
The optimal default values are the same as the shipping configuration default values.
Press <F1> from any root menu to display more information about navigating the BIOS setup
program.
Menu items listed in blue are changeable; menu items in gray are not changeable. A blue
triangle next to a menu item indicates that the menu item contains a submenu.
Main Menu
The most commonly accessed and modified BIOS settings are in the Main setup menu.
•
System Date—Changes the system date. The system date setting is stored in a batter-
backed real-time clock. You can also change this setting from within MAX or Vision
Builder AI.
•
System Time—Changes the system time. The system time setting is stored in a battery-
backed real-time clock. You can also change this setting from within MAX or Vision
Builder AI.
Advanced Menu
This menu contain BIOS settings that normally do not require modification. If you have
specific problems such as unbootable disks or resource conflicts, you may need to examine
these settings.
The Advanced setup menu includes the following submenus:
•
Power/Wake Configuration
•
Serial Port Configuration
•
SATA Configuration
•
USB Configuration
Power/Wake Configuration Submenu
Use this submenu to apply alternate configurations to the power features of the chipset and
controller. Normally, you do not need to modify these settings, as the factory default settings
provide the most compatible and optimal configuration possible.
•
Restore After Power Loss—Specify what state to go to when power is reapplied after a
power failure.
Serial Port Configuration Submenu
Use this submenu to view the serial port configuration.
•
RS485/RS232 Select—This setting selects the transceiver mode between RS-232 and
RS-485. The default value is RS485.
•
RS-485 Configuration—Use this menu to configure the RS-485/422 wire-mode. The
default value is Auto.
18 | ni.com | NI CVS-1459 User Manual
Advertisement
Table of Contents
